Zscaler 部落格

訂閱 Zscaler 部落格,第一時間獲取最新資訊!

Products & Solutions

New IPSec Traffic Forwarding Guidance for Zscaler Customers

>New IPSec Traffic Forwarding Guidance for Zscaler Customers

Key points:

  • Zscaler recommends using IKEv2 protocol wherever possible as it is faster, more secure, and more resilient than IKEv1
  • Zscaler recommends using AES-GCM encryption rather than NULL encryption

Background

Zscaler has been supporting IPSec as a traffic forwarding mechanism for many years. During this time, we have introduced multiple options to forward traffic to the Zscaler cloud. These have included Z-tunnel 1.0 aka HTTP-based tunnels, and Z-tunnel 2.0 which brought in the support for TLS/ DTLS-based encrypted tunneling mechanisms. These Z-tunnels are established by the Zscaler Client Connector or the Cloud Connector. GRE or IPSec tunnels have been the methods of choice to forward traffic from office locations, and have been employed by thousands of customers. IPSec tunnels are preferred by organizations that need the added security of encryption, integrity, and authentication of the traffic when it is forwarded to the Zscaler cloud.

Internet Key Exchange (IKE) guidance

IPSec peers negotiate the authentication and encryption algorithms using the Internet Key Exchange (IKE) process. The IKEv1 (RFC 2409) introduced in 1998 was succeeded by IKEv2 (RFC 4306) in 2005, which was updated in 2014 and continues to be updated—with the latest being RFC 8983 in 2021. The IKEv2 updates brought with them numerous advantages over v1, some of which are:

  • It requires fewer messages to be exchanged between the peers to establish the modalities for IPSec
  • It takes up less bandwidth than IKEv1
  • It is more resistant to Denial of Service (DoS) attacks
  • It natively supports NAT-Traversal (NAT-T)
  • Automatic detection of liveness of IPSec tunnel so IKE connection can be reestablished if necessary
  • It supports newer encryption algorithms such as AES-GCM

Some customers have endpoint devices that support only the older standard of IKEv1. Zscaler supports IKEv1 although our recommendation has always been to use the IKEv2 because of the aforementioned reasons. Most modern implementations of IPSec support both IKEv1 and IKEv2. Some operating systems, such as Cisco’s IOS and Juniper’s JUNOS, may need a manual configuration to enable the use of IKEv2. We recommend that customers use IKEv2 when available. 

Encryption algorithm guidance

Zscaler supports NULL encryption, AES-CBC, and AES-GCM encryption algorithms. Among these, historically, we have always recommended NULL encryption because the traffic forwarded to the Zscaler cloud egresses to the destination using either HTTPS (> 90% of the traffic) or HTTP without being encrypted any further. However, there are thousands of customers who chose to encrypt the traffic being forwarded to the Zscaler service using an encryption algorithm. Support for AES-GCM, which is a relatively newer encryption standard, was added a few years ago. AES-GCM has the following advantages over the older AES-CBC standard:

  • It provides authentication, removing the need for an HMAC SHA hashing function
  • It is faster than AES-CBC because it allows parallelization and it uses hardware acceleration such as AES-NI
  • AES-GCM is a more modern algorithm. For example, TLS1.3 does not support AES-CBC anymore
  • It is not susceptible to some of the attacks that the AES-CBC algorithm can be exploited with, such as padding oracle attacks

It is for the aforementioned reasons that Zscaler is now updating its recommendation to use the AES-GCM encryption algorithm. 

Summary

Zscaler strives to maintain a high level of security in the service offered to its customers. If you are currently using IKEv1 as the key exchange mechanism for IPSec forwarding to Zscaler, you should upgrade to IKEv2 as soon as possible. If you are using AES-CBC as the encryption algorithm and AES-GCM is available for your IPSec device on-premises, you should move to AES-GCM to take advantage of the improved performance and capabilities. If you are using NULL encryption as per our earlier recommendation, note that you will need to purchase an additional subscription to enable the encryption. You can choose to continue using NULL encryption at no additional cost. 

Learn more about Zscaler guidance on traffic forwarding here. 

form submtited
感謝您的閱讀

這篇文章對您有幫助嗎?

免責聲明:本部落格文章由 Zscaler 製作,僅供資訊參考,並以「現狀」提供,不保證其準確性、完整性或可靠性。Zscaler 對任何錯誤或遺漏,或基於所提供的資訊而採取的任何行動不承擔任何責任。本部落格文章中連結的任何第三方網站或資源僅為方便起見而提供,Zscaler 對其內容或做法概不負責。所有內容如有變更,恕不另行通知。存取此部落格,即表示您同意這些條款,並承認您有責任自行驗證並根據您的需求適當使用資訊。

訂閱 Zscaler 部落格,第一時間獲取最新資訊!

提交此表格即表示您同意我們的隱私權政策。